3700 Series ANSI Grade 2 Interconnected Lock
Installation Instructions
Meets ANSI 156.12
I-LS00770
REV 2
Page 3 of 3
8. INSTALL INSIDE LEVER
See illustration shown below to determine hand of door.
CHANGE HAND OF DRIVER TAB
There are two driver tabs, one at the left side and one at the right side. Sliding driver tab to right side (or left side) will automatically pull out driver
tab at left side (or right side). Use correct driver tab to match handing of door.
CATCH PIN
INSIDE LEVER
SPINDLE
H. Install inside lever, use pin to press down the lever catch in the
hole and push inside lever all the way in until catch clicks into catch
hole.
I.
Properly installed, the latchbolt will retract by rotating the lever
in the downward direction only.
DRIVER TAB AT LEFT SIDE
DRIVER TAB AT RIGHT SIDE
HINGE
HINGE
OUTSIDE
OUTSIDE
LEFT HANDED DOOR
RIGHT HANDED DOOR
