Hagen Exo Terra PT2060, Руководство по эксплуатации

Страница: 5 / 36

Installation
Main parts
1. 6 ft (1.80 m) power cord
2. Ceramic socket
3 . Wire guard
4 . Hanger
Installation hanging from the ceiling or an elevated platform:
1. Screw light bulb into the Exo Terra
®
Wire Light (follow maximum
wattage guidelines). TIP: apply a thin layer of petroleum jelly to
the threads on the base of the light bulb before screwing it in.
This will make it easier to unscrew the bulb when it is time to
replace it.
2. Insert Hanger into the mounting brackets located on either side
of the lamp socket (A).
3. Suspend Exo Terra
®
Wire Light from ceiling or other elevated
platform using a chain or other recommended suspension
method. Ensure that the lamp is positioned over the top metal
screen portion of your terrarium and NOT over any glass, plastic
parts, or other flammable material. Failure to do so could result in
a possible fire hazard.
4. Keep unit out of reach of children. Keep unit away from curtains
or other flammable objects.
Installation with Light Bracket (Sold separately PT2223):
1. Screw light bulb into the Exo Terra
®
Wire Light (follow maximum
wattage guidelines). TIP: apply a thin layer of petroleum jelly to
the threads on the base of the light bulb before screwing it in.
This will make it easier to unscrew the bulb when it is time to
replace it.
2. Insert Hanger into the mounting brackets located on either side
of the lamp socket (A).
3 . Clean the outside surface of the terrarium glass.
4 . With the protective backing still intact, place the Light Bracket
support on the back or the side of the terrarium to determine its
final position.
5. Mark the position with a wax pencil or other marker.
6. Remove the protective backing and carefully fit the Light Bracket
support within the marked area.
7 . Make sure the tape is pressed evenly against the terrarium glass
ENGLISH
FRANÇAIS
DEUTSCH
ESP
AÑOL
IT
ALIANO
NEDERLANDS
4
1
3
2
A