7.4.2 Single Channel Mode – Automatic Channel Recognition
Your Hagen can automatically recognize the pedal’s send/receive channel. To get your amp
into the mood (or mode) for this, push and hold “Mute” and then activate any program
change button on your MIDI pedal. The amp will look for a program change and recognize
the channel it is being sent on. Then it will switch to this channel and stay there as soon as
you let go of “Mute”.
7.4.3 Single Channel Mode – Manual Channel Selection
If you would like to have your Hagen on a certain MIDI channel, then we can
accommodate you here as well. Here is how this works:
Push and hold “Mute” and then turn on the preamp channels in the order that corresponds
to your midi channel preference. For example: if you want to have your Hagen to respond
only to MIDI information that is being sent on channel 7, then you must hold the “Mute”
button down and turn the Preamp channel one selector off, channel two selector on,
channel 3 selector on, channel 4 selector off. If you let go of “Mute” now, then your Hagen
is set to respond to MIDI channel 7 only. Get it? The table below gives you the sequence for
all 16 MIDI channels.
Midi
Channel Ch1 CH2 CH3 CH4
1 off
off
off
off
2
on off off off
3 off
on
off
off
4 on
on
off
off
5
off off on off
6 on
off
on
off
7 off
on
on
off
8 on
on
on
off
9 off
off
off
on
10 on
off
off
on
11 off
on
off
on
12 on
on
off
on
13 off
off
on
on
14 on
off
on
on
15 off
on
on
on
16 on
on
on
on