1.
Read Instructions
AII the safety and operating instructions of your Hafler
equipment should be read before power is applied to
the equipment.
2.
Retain Instructions
These safety and operating instructions should be held
for future reference.
3.
Heed Warnings
All warnings on the equipment and in the operating
instructions are important and should be followed.
4.
Follow
instructions
All operating and use instructions are important and
should be followed.
5.
Heat
The equipment should be kept away from areas of high
temperature, such as heater vents, radiators, stoves/
ovens, fireplaces, etc.
6.
Ventilation
The equipment should be used in an area suitable for
proper ventilation. Care should be taken to not impede
airflow in and around the cabinet. Do not mount on a
carpeted shelf or in an enclosure consisting of more than
five sides. Allow for proper clearance above the equip-
ment.
7.
Water and Moisture
8.
The equipment should not be used in or around water -
such as a bathtub, sink, or swimming area. Also, the
equipment should not be used in areas prone to flooding
- such as a basement.
Power Sources
The equipment should be connected only to a power
source of the same voltage and frequency as that listed
on the rear panel near the power cord entry point.
9.
Power Cord Protection
NOTICE
-
IMPORTANT SAFETY INFORMATION
DO NOT DISPOSE OF
-
KEEP FOR FUTURE REFERENCE
Safety Instructions
Power cords should be run so that they do not interfere
with the movement of objects in the room
-
people, fan
blades, utility carts, etc. Also, care should be taken that
the cord is not pinched or cut, and placed so that it is not
in danger of being pinched or cut, as in under a rug,
around a tight corner, etc.
10.
11.
12.
13.
14.
15.
Grounding and Polarization
The power supply cord is of a polarized type designed
to reduce the risk of electric shock sustained from a live
cabinet. It is assumed to be of a suitable length for most
uses of the equipment. The use of extension cords and
power strips is discouraged unless they are of suitable
rating to deliver the required current for safe equipment
operation and can be used so that the polarization of
the plug is not defeated. If an extension cord is required,
it is important that the blades of the plug be able to insert
fully into the receptacle. Professional amplifiers with a
S-conductor line cord must never have the ground pin
of the plug defeated.
Non-Use Periods
During extended periods of non-use the power supply
cord should be kept unplugged from the power source.
Cleaning
The equipment should be cleaned only as detailed by
the owners manual.
Object and Liquid Entry
Care should be taken so that objects and/or liquids,
such as cleaning fluids, are not spilled into the enclosure
of the equipment.
Damage Requiring Service
HafIer equipment should be serviced by qualified ser-
vice personnel when:
A.
B.
C.
D.
E.
The power supply cord or plug has been
damaged; or
Objects have fallen, or liquid has been spilled
into the equipment; or
The equipment has been exposed to rain; or
The equipment does not appear to operate
normally or exhibits a marked change in per-
formance; or
The equipment has been dropped, or the en-
closure damaged.
Servicing
The user should not attempt to service the equipment
beyond that which is described in the manual. All other
service should be referred to qualified service person-
nel.
-2-
