Manual SOUNDSYSTEM 420R
applicable for
822.65.004
Version (Technical and optical modifications reserved)
03.08.2015
Seite 10 von 13
Power recovery
The tuner returns to operation with the re-applied power with the last saved settings
(volume, channel 1-9).
Message signal at frequency range (Triple „beep“)
If the boundary of the selectable frequency band is reached or there is a false entry in the direct frequency
input the status is acknowledged by a triple “beep”.
Bluetooth operation locks memory functions
Memory scan and station setting via frequency input is not possible.
Choose a station (button 1-9) first.
10.2. Bluetooth Operation Mode
Notes:
- The SOUNDSYSTEM 420R remains in the Pairing Mode for max. 1 minute and then if there is no
external Bluetooth device connected automatically switches to the Stand-By Mode
- The SOUNDSYSTEM 420R can handle and save a
maximum of 8 separate Pairings
to Bluetooth-
enabled devices. When adding a new device the first Pairing will be overwritten.
Proceed with PAIRING according to your Bluetooth enabled device.
Making sure that your device meets the required Bluetooth specification. The pairing process is very
different from device to device.
Note:
Please, read the manual of your Bluetooth-enabled device carefully.
Note the following advice for Pairing
Make sure that your Bluetooth device enables A2DP specifications according to IEEE 802.15.1. The
Pairing itself may be different concerning manufacturer or device.
Read the user manual of your Bluetooth-enabled device carefully!
Pairing in general:
1.
There must be line of sight connection when the Pairing is performed. Make sure that there is a
maximum distance of not more than 1m between the SOUNDSYSTEM 420R and your Bluetooth-
enabled device.
2.
Activate the Bluetooth Mode of your mobile device and start the SEARCH function for other
Bluetooth equipment. The SOUNDSYSTEM 420R will show as „
SOUNDSYSTEM 420R
“. Select
and continue.
3.
If there is a password needed please enter „0000“.
After the first Pairing with an external device the SOUNDSYSTEM 420 identifies the mobile device and no
future Pairing is necessary.
Automated Pairing:
If the Bluetooth connection is shut down by the mobile device the SOUNDSYSTEM 420R starts another
pairing procedure for 3 minutes.
