of the optical level indicator C located next to the cap. When the rinse-aid container is full, the whole
When to Refill the Rinse Aid Dispenser
If there is no rinse-aid warning light in the control panel, you can estimate the amount from the colour
" "
indicator will be dark .As the rinse -aid diminishes, the size of the dark dot decreases. You should never let
the rinse aid level fall 1 / 4 full .
As the rinse aid diminishes, the size of the black dot
on the rinse aid level indicator changes, as illustrated below.
Full
3 / 4 full
1 / 2 full
1 / 4 full - Should refill to eliminate spotting
Empty
T
out.
it to the closed (right) arrow.
an absorbent cloth to avoid excessive foaming
efore you close dishwasher door.
six or four settings. Always start with the dispenser
drying are a problem, increase the amount of rinse
he dispenser lid and rotating the dial to "5". If the
perly or are show spots, adjust the dial to the next
are spot-free. The recommended setting is "4".
water or lime spots on the dishes after washing.
ins on your dishes or a bluish film on glassware or
knife blades.
Detergents with its chemical ingredients are necessary to remove dirt, crush dirt and transport it out of the dishwasher. Most of
the commercial quality detergents are suitable for this purpose.
Attention!
Proper Use of Detergent
Use only detergent specifically made for the use in dishwashers. Keep your detergent fresh and dry. Don't
put powdered detergent into the dispenser until you're ready to wash dishes.
