Hafele DT 750, Инструкция по установке и обслуживанию

Страница: 6 / 32

H
D
E
0
6
/2
019
7
32
.29
.5
0
1
6
Here, in particular:
• The operator must ensure that escape routes and emergency exit doors are
accessible for all people in case of danger.
• The operator must be aware of the applicable occupational safety regulations
and determine other hazards in a hazard assessment that may arise from the
special working conditions at the place of use of the access control system. The
safety regulations must be implemented for the operation of the access control
system in the form of operating instructions.
• During the entire operating time of the access control system, the operator must
verify that the operating instructions created correspond to the current state of
the regulations and, if necessary, adapt them.
• The operator must clearly regulate and specify the responsibilities for
installation, operation, troubleshooting, maintenance, and cleaning.
• The operator must ensure that all persons handling the access control system
have read and understood these installation and maintenance instructions.
In addition, the operator must train the personnel at regular intervals and inform
them about the risks.
Furthermore, the operator is responsible for ensuring that the access control system
is always in perfect technical condition. The following therefore applies:
• The operator must ensure that the maintenance intervals specified in these
installation and maintenance instructions are followed.
• The operator must have all safety devices inspected regularly for function
and completeness.
2.6 Personnel
requirements
These installation and maintenance instructions describe the qualifications listed
below for the personnel for the various work areas:
Qualified electrician
Qualified electricians are capable of working on electrical systems and recognize
potential hazards and avoid them due to their professional training, knowledge,
experience as well as knowledge of pertinent standards and provisions.
Qualified electricians have been specifically trained for the working environment
in which they operate and know the relevant standards and regulations.
NOTE
Warning of abuse
Unauthorized persons can gain access to rooms using the programming and
clearing keys.
> Only personnel who are authorized by the operator may allocate locking
authorizations.
> Take care when allocating locking authorizations to avoid overlapping or
mistakes.
> Keep programming and clearing keys in a safe place and protect from
abuse.
> It must be ensured that the Dialock server and the network are protected
from malware attacks by suitable virus protection programs in order to
rule out manipulation of the offline terminals.
ins-srce-732.29.501_en.book Seite 6 Montag, 3. Juni 2019 11:53 11