INSTALLING & REMOVING FILTERS
FILTER REPLACE INDICATOR
The POWER light flickering continuously indicates that it is time to replace the filter. Replace
the filter according to the directions below then press the POWER button holding for 5 seconds
to restart the program system. The light will stop flickering.
*Combination Filter will last approximately 6 months.
CLEANING & MAINTAINING
1. Upside down the machine.
2. Remove the screw below the base then the base.
3. Take out dirty filter and insert new filter into the unit.
4. Reattach the base to the unit and fasten it by screw.
5. Press and hold POWER Button for 5 seconds to reset program.
The machine should be cleaned at least once every month by a clean, dry, soft cloth.
More frequent cleaning may be required depending on environmental conditions.
NOTE:
Do NOT stick any foreign objects or your fingers inside of the unit.
Do NOT use gasoline, benzine, thinner, harsh cleaners, etc. on and/or in
the unit while cleaning as they will damage the product.
NEVER use alcohol or other solvents.
8