Hafele 7200, Руководство пользователя

Страница: 11 / 24

Function to open a door using outside emergency key
(Applied model with emergency key)
The function allows opening a door using emergency key in case of emergency or other
particular situations. Pull emergency hole cap to side, insert emergency key to the hole and
turn around the key.
User the function only in case of emergency. Alarm sounds when using emergency key.
Always take the emergency key with you in case of emergency.
Function to prevent password exposure
(Fake number function)
Hide password by pressing password after entering random numbers.
Alert function
- Locking error alert function:
When a door is not properly closed, it makes 3 attempts to open the door and generate 3 beeping sounds to alert.
- Intrusion and prank prevention function:
Function to generate emergency alarm for 1 minute to prevent intrusion when there is an attempt to open a door by force.
Enter password or touch key (Card/Key tag) to turn off the alarm.
Sound settings
- Adjust sound (Mute
→
High volume):
Press internal Input button
→
Press 1, 3, and in order Press "1" button several times to turn down volume or
"3" button several times to turn up the volume (Mute to High volume) Press button
Touch pad type can adjust volume from low to high. The volume of sound can be adjusted in seven steps.
- Manner mode (Mute function):
Lift up outdoor body cover and press # button Enter password Pull down cover or press button
Touch pad type does not support mute function.
The silent function is for a single occasion, so perform the function whenever you need it.
Fire detection function
(Built in fire detection sensor)
When heat detection sensor detects heat , it automatically opens a door.
When indoor body is exposed to direct sunlight for a long period of time, the temperature sensor may generate alarm.
External alarm function (Applied model with external alarm function)
Other useful functions
- External ‘Pin Err’ lamp flashes when entering invalid password. Enter correct password again.
-
‘Low Batt’ lamp flashes, when batteries are going flat. Immediately change all of 4 batteries.
- When ‘Double lock’ lamp flashes, a door will not open even after entering correct password.
(Dual locking function is enabled).
- If
‘Bolt Err’ lamp flashes, open/close function is not working properly since dead bolt(Latch)
of indoor body is stuck in front (Strike).
Set auto/manual locking
(Convenient function to automatically lock 1 second after closing a door)
- Auto lock: Open battery cover and press Input button Press # button Press Input button (Ding-dong-dang sound)
- Manual lock: Open battery cover and press Input button Press # button Press Input button
(Beeping sound when set to manual lock mode)
Set auto locking time
(Change auto lock time to 2 ~ 9 seconds)
Press Input button on indoor body Press 8 Press time you wish to set (2~9 button) Press button
_ (60
o
C +10
o
C)