7
Preparing for use
1. Place the appliance on a stable, horizontal and even surface.
Do not place the appliance on non-heart-resistant surface.
2. Place the basket in the pan (Fig.3).
Do not fill the pan with oil or any other liquid.
Do not put anything on top of the appliance, the airflow will be disrupted and
affects the hot air frying result.
Using the appliance
The oil-free can prepare a large range of ingredients. The recipe booklet included
helps you get to know the appliance.
Hot air frying
1. Connect the mains plug into an earthed wall socket.
2. Carefully pull the pan out of the Hot-air fryer (Fig.6)
3. Put the ingredients in the basket. (Fig.5)
4. Slide the pan back into the Hot-air fryer (Fig 4)
Noting to carefully align with the guides in the body of the fryer.
Never use the pan without the basket in it.
Caution: Do not touch the pan during and some time after use, as it gets very
hot. Only hold the pan by the handle.
5. Determine the required preparation time for the ingredient ( see section ‘Settings’
in this chapter).
6. Some ingredients require shaking halfway through the preparation time (see
section “Settings” in this chapter). To shake the ingredients, pull the pan out of the
appliance by the handle and shake it. Then slide the pan back into the I fryer
Caution: Do not press the button the handle during shaking. (Fig.3)
Tip: To reduce the weight, you can remove the basket from the pan and shake the
basket only. To do so, pull the pan out of the appliance, place it on a heat-resistant
surface and press the button of handle. and lift the basket out of the pan
Tip: If you set the timer to half the preparation time, you hear the timer bell when you
have to shake the ingredients. However, this means that you have to set the timer
again to the remaining preparation time after shaking.
7. When you hear the timer bell, the set preparation time has elapsed. Pull the pan
out of the appliance and place it on a the trial framework.
Note: You can also switch off the appliance manually. To do this, turn the time control
knob to 0.
