Häfele HH-BI72A, Инструкция по эксплуатации

Страница: 9 / 21

Aluminum pipe fitting:
One end of the aluminum pipe is the plastic bacquet on the product; And the
other end to the kitchen sink. Make sure that these two connectors are tight enough that they will not
come out of place when the hood is operating at the highest speed. The diameter of plastic bacan on
the product is 150 mm. If aluminum pipe with a diameter of 120 mm is to be used, it is necessary to
install a plastic reducer from the packaging.
4. Product Usage
-
We recommend that the cooker be opened before any food is cooked. At the same time, we
recommend that your product be cooked for 15 minutes after cooking to remove all the dirty air.
-
The effective performance of your hood depends on regular care; Oil filter requires special
attention.
-
The oil filter is used to catch oil particles suspended in the air; Therefore it reaches saturation for a
certain period of time (the saturation of the filter depends on the method of use of the product).
-
The lighting system is designed to be used during the cooking process; Please do not use it for a
long time to general illumination of the room.
Lighting button:
You can illuminate the cooking area by touching this area.
On/Off button: Touching this area will start working at the 2nd speed level when you turn on the
product. Press this field to turn off the product while it is running.
Speed Steps:
The cycle stages are denoted as 1,2, 3,4 and 5,6,7,8,9; You can increase or decrease the
product's running speed, respectively.
Timer:
If you press the timer button while the aspirator is operating in any of the cycle stages, the
aspirator will run for 15 minutes and will stop automatically after this time. When the automatic stop
is activated, the speed indicator on the display will flash. It is sufficient to press this function again to
deactivate it before 15 minutes.
Filter Warning:
When the cumulative motor ON time exceeds 30 hrs of operation an 'F' will be
displayed, each time the motor starts, warning the user that the Grease Filter needs to be cleaned/replaced.
When the cumulative motor ON time exceeds 300 hrs of operation a 'C' will be displayed, each time the
motor starts, warning the user that the Carbon Filter needs to be cleaned/replaced. To reset the Grease
Filter warning the user must press and hold the ▼ (-) button, while the motor is OFF, until an 'E' is
displayed indicating that the Grease Filter timer has been reset. To reset the Carbon Filter warning the user
must press and hold the ▲ (+) button, while the motor is OFF, until an 'E' is displayed indicating that the
Carbon Filter timer has been reset . The filter warning periods can be customized as required.