Height adjustable pull out larder unit:
Assembly guide
Sales and Technical Support -
Tel: 01788 542020, Fax: 01788 544440, E-Mail: [email protected]
Sales and Technical Support -
Tel: 01788 542020, Fax: 01788 544440, E-Mail: [email protected]
Steps 7 to 10
If a false double door effect is to be used, then connect the
two door panels using the 2 door panel connectors (E) and
8 x M4 x 15.0 mm pan head screws (N).
7
Attach the top and bottom door panel hanging plates (C) to the
door panel using 4 x M4 x 15.0 mm pan head screws (N) per bracket.
Use the measuring guide above to assist. Then attach the third door
panel hanging plate close to the door handle positioned, again using
4 x M4 x 15.0 mm pan head screws (N).
8
Insert loosely 2 x M5 x 6.0 mm raised head screws (M) into each of
the door panel hanging plates (C), then locate these screws into
the door panel hanging brackets (B) attached to the main frame (A).
Then secure the 2 x M5 x 6.0 mm round head screws (M) on each
of the door panel hanging plates (C).
9
A = 286 mm + door overlay
Installed unit height 950 - 1200 mm. B = 400 mm
Installed unit height 1200 - 1450 mm, B = 624 mm
Installed unit height 1450 - 1700 mm, B = 1024 mm
Installed unit height 1700 - 1950 mm, B = 1175 mm
Installed unit height 1950 - 2200 mm, B = 1400 mm
C = 127.5 mm for a 300 mm carcase
177.5 mm for a 400 mm carcase
227.5 mm for a 500 mm carcase
277.5 mm for a 600 mm carcase
D = 239 mm for a 300 mm carcase
339 mm for a 400 mm carcase
439 mm for a 500 mm carcase
539 mm for a 600 mm carcase
A
B
Attach the third door panel hanging bracket (B) around the
frame onto the door panel hanging plate closely situated
behind the door handle position to stop the centre of the
door flexing, using 2 x M5 x 6.0 mm round head bolts (M).
10
C
D
