Häfele HC-IF60D, Руководство пользователя

Страница: 20 / 52

20
OPERATION
Button lock (child safety feature)
- If the touch control is turned on but no cooking zones are operating (all the indicators (4)
are flashing), the stand-alone timer can be activated by simultaneously pressing buttons
(15) and (16) until indicator (17) turns on. If, however, any of the zones is at a power level
other than “0”, the stand-alone timer can be activated by simultaneously pressing buttons
(15) and (16) several times until indicator (17) turns on. The timer display (8) shows “0.00”.
Now it is possible to select the required time between 0 and 119 minutes. If no value is
selected, the timer is deactivated after 5 seconds.
- To select the required time, simply press the More button (16) to increase the time or the
Less button (15) to reduce it.
- After the programmed time, an intermittent sound signal is activated and the display (8)
shows an flashing “0.00”. Both “0.00” and the sound signal turn off when any of buttons
(15), (16) or (1) are pressed, or after 2 minutes have elapsed.
- If it is active, when the Touch Control is switched off using the ON/OFF button (1), the
stand-alone timer continues the countdown.
Protection against unintentional activation
If the Touch Control detects continued pressure on a button for more than 10 seconds:
- If it is the ON/OFF button, (1), all the displays flash with the symbol shown below until the
pressure is removed and any one of the buttons is pressed again. - If it is the sliding control,
the control produces a continuous acoustic signal and the symbol shown below flashes
on the corresponding display (7). If the pressure is maintained, Touch Control switches off
after a further 20 seconds.
Water or food spilt on the glass in the control zone may be detected as a continuous pres-
sure on one or more buttons.
If no cooking zone is activated within 20 seconds after switching on the touch control, it will
return to standby mode.
- When the control is switched on, the ON/OFF button takes priority over the other buttons,
to allow the control to be switched off at any time, in the event of multiple or continuous
pressure on the buttons.
-• In standby mode, no effect will be caused by buttons being kept held down. In any case,
to switch the electronic control back on, the control must have detected that no buttons
are pressed down.