8
9
3. Switch off
4. Timer
5. Power Heating Function
6. Lock Function
Booster function
Pause Function
When in working or switch on, press “ON/OFF” button, the cooker will
stop working and enters into power on condition.
1) Time range from 1 minutes to 3 hours.
2) During working, press “Timer” button once, the LED shows “00:00”.
Press “-” / “+”to decrease or increase the time. It will be automatically
confirmed in 5 seconds after you set the time. It enters into timed
countdown state, it will turn off once over.
3) During the timer mode, press “Timer” button, the LED shows the left
time, meanwhile the timer could be reset again at this time
4) Press “Timer” again to cancel the timer function.
1) When switch on, press any power level to start working, LED shows
relevant power level.
2) When working, press “+/-” or slip operate the button to adjust power
level 1-8.
1) During the power on or working state, press "lock" button, lock
indicator keeps constant on. During this mode, it will lock the control
panel except the “On/Off” button.
2) Any operation, the LED shows “LOC” for 5 seconds, then shows
original info. Switch off in any way will cancel lock function.
3) Press "lock" button again, lock indicator disappears, the control
panel is unlocked.
1 )Press “P” once in working to boost fire, LED shows “P”. Booster
indicator keeps constant on.
2) Press “P” again to back to original working condition. Default setting
is 5 minutes, then back to previous working condition.
Press “ ” once in working to enter into pause mode, stop working
and the display won’t change, pause indicator keeps constant on.
Press “ ” again to continue working. If user doesn’t cancel pause
within 60S, the cooker will automatically turn off and enter into power
on state.
7. Fan Keeps Working
8.Automatically Switch Off When No Operation for 2 Hours
When switch off, fan keeps working when IGBT temperature is higher
than around 52 C and stops working when IGBT temperature is lower
than around 50 C.
When switch off, fan keeps working when pot bottom temperature
is higher than around 150 C and stops working when pot bottom
temperature is lower than around 148 C
In working mode, the cooker will automatically switch off if without any
operation after 2 hours except the mode of timer and preset.
1. Turn off the appliance by pressing “On/Off” and wait until the light turns off.
Once off, unplug the power cord properly.
2. Wait for some time and let the appliance cool down.
3. You can use mild detergent or dish washing liquid with a soft cloth to
remove dirt.
4. Do not clean it with running water or immerse it in water as water will get
inside and damage the appliance.
5. Always make sure that the top plate and the pan/pot is clean before
cooking as the dirt from the pan/pot will stick to the plate and plate will get
discolored.
6. You may clean the air vent by vacuum cleaner to suck up the dirt or you
can use cotton if the dirt is with oil.
7. Toothbrush with little soap can also be used to clean the surface as long as
you use it gently on the appliance.
8. Do not use abrasives or strong detergents as it may get chemical reaction.
9. After dirt has been removed, use a dry, soft cloth to wipe dry the
appliance.
O
O
O
O
CLEANING AND MAINTENANCE