6
7
Air Cleaning System
Operating The Air Purifier
Improve your indoor air quality with your new Air Cleaning System. Multiple levels of
cleaning include a combination of Pre-filter that traps big particals, HEPA filter that cap-
tures micro particles UV-C light technology enhances germ-killing.
PRE-FILTER:
Captures initial dust and allergen particles.
HEPA FILTER:
Captures dust, smoke, pollen and other allergens;
Activated Carbon Filter:
Removes odors and bad smells.
1.POWER/FILTER RESET
Soft press to turn on/ off the unit.
Note: Long press this button for 3 seconds can reset Filter
Replace Indicator.
FILTER REPLACE INDICATOR
The RED LED of filter reset being ON continuously indicates that it is time to replace the
filter. Follow the instruction below to change filter and reset the program.
*Combination Filter will last approximately 6 months.
2.UV-C and Sleep
First press this button to turn on UV lamp.
Second press this button to turn on Sleep mode.
Third press this button to turn off the UV lamp.
1. Find the lock on the base of the unit. 2.Unock it by moving it
to left.
2. Lift up the unit.
3. Get the dirty filter out and put a new one into.
4. Set back the unit and move the lock to right.
5. Press Power on/off button for 3s to reset the firmware.
3.“TIMER” BUTTON:
By pressing this button, the purifier can be timed to operate
for intervals of 2, 4 and 8 hours, stopping automatically when
the selected operating time has elapsed.
4.“SPEED” BUTTON:
There are 4 speed setting.
Press the button each time to select L(I),M(II),H(III) and Turbo
speed.
5. “AUTO” BUTTON and ION:
Press the button to turn on AUTO mode.
Under AUTO mode, the unit will automatically change the
speed according to the air quality detected by dust sensor.
Air quality indication LED ring show different color in below
logic:
Long press the button for 3-5 second to active or cancel the
WIFI connection.
Installing & Removing Filters
Heavily Polluted
Red
Lightly Polluted
Orange
Moderate
Yellow
Good
Blue
