732.28.426
HDE 27.07.21
9/10
en
3.3. Provisioning and Configuration of a Connect Mesh 6 way distributor
Choose a configuration
[Image 6]
As soon as the Connect Mesh Remote Control is in Provisioner Mode, you can select one of the following buttons to
provision and configure BLE Connect Mesh 6 way distributors within reach. The Connect Mesh 6 way distributor you
would like to add to your network has to be in Provisioning Mode.
A
Configuration: Monochrome
The Connect Mesh 6 way distributor will be configured with 6 single channels.
B
Configuration: Multi White
The Connect Mesh 6 way distributor will be configured with 3 multi white channels.
C Configuration: RGB
The Connect Mesh 6 way distributor will be configured with 2 RGB channels.
After a configuration has been selected, the remote control starts provisioning the first Connect Mesh 6 way dis
-
tributor within range. The status LEDs indicate provisioning with a running light. After the first Connect Mesh 6 way
distributor has been successfully provisioned, the remote control searches for the next Connect Mesh 6 way dis
-
tributor. This process must be cancelled manually when all desired Connect Mesh 6 way distributors have been
configured.
To leave the provisioning mode, please press any button. This will immediately stop the search for further mesh de
-
vices.
3.4. Controlling Lights in Standalone Mode
Depending on how the Connect Mesh 6 way distributors were configured, lights are controlled differently with
the remote. Refer to the table below to see what the control looks like for your configuration.
Monochrome
Channel 1-6 mirror the Channels in the same order.
Multi White
Channel 1: Multi White Light attached to channel 1 and 2.
Channel 2: Multi White Light attached to channel 3 and 4.
Channel 3: Multi White Light attached to channel 5 and 6.
RGB
Channel 1: RGB Light attached to channel 1, 2 and 3.
Channel 2: RGB Light attached to channel 4, 5 and 6.
