Häfele 580.37.051, Руководство пользователя

Страница: 4 / 20

4
ATTENTIONS BEFORE INSTALLATION
TO MAKE SURE THE APPLIANCE DO WORK AND EXTEND ITS LIFESPAN
UNDER THE GOOD CONDITION, PLEASE NOTICE THAT:
1. The instructions manual must be followed carefully when installing.
2. Use the same known brand AA battery (4pcs) with good quality. New and used batteries can't
be mixed. If the inferior batteries are counterfeit and shoddy, it may do harm to unit working and i
ts lifetime.
3. Before installation, please make sure the wall is plain and clean.
4. Make sure the distance must be more than 25cm from the table or any reflective objects to
the sensor.
5. The instructions manual should be turned over to the user or person in charge after finishing
the installation. 6. Any objects should not be put within the sensing distance.
7. No reflective objects such as stainless steel and photoelectric sensors are allowed to be installed
on the
table directly facing the sensing window, that will cause the appliance to work automatically.
8. Indoor use only.
CAUTION
1. The unit is suggested to install batteries even if you don't use it, so that the unit can automatically
run once per 72 hours in the standby status to avoid the catheter press ure adhesion.
2. Some of unit had installed batteries and in dormant status before delivery. Keep press setting
buttons for more than 5 seconds, the indicator will flash 3 times turning into standby status. Whereas
if the unit turn to dormant status after keeping press the setting button, you can also re-installation
batteries to turn the unit to standby status directly.
PACKING LIST
Automatic soap dispenser X1
Expansion screws X3
Wall-mounted kit X1
User Manual X1
ST4X25 screws X3
Certificate of Qualification X1
Key X1
SPECIFICATIONS
DC6V/ AA Battery (4pcs)
Voltage
Supply
Volume 850ml 5~9cm
0.5~2.5ml(5 levels adjustable)
Sensing distance
Ambient temperature