INSTALLING THE DOORS
Close the bed back onto the temporary stoppers
EE
. Hook the door brackets
the doors on the frame and adjust with bracket screws if needed.
14.1
Attach the doors to the frame with all of the screws provided (multiple holes in frame
available) while putting weight on the frame to keep the bed open. We recommend
to have someone else sit on the frame during this step.
R
S
R
S
For this step
x 2
x 72
x 32
NOTE: The use of a foam/very
light mattress is NOT
recommended for this product.
-
14.2
14
Once the doors are hooked on, if necessary, you can adjust the angles and height
of each door with bracket ‘’K’’. Adjust each bracket until:
- the doors open and close well;
- have an even gap on each side;
- doors are lined up with the cabinet.
Turn the screw
counter clockwise
to loosen
=
Door will go down
Turn the screw
clockwise
to tighten
=
Door will go up
Note that ends are rounded so
that doors can slide left - right for
a better adjustment.
Page 16
The pistons are now installed,
therefore, the bed will
NOT
stay down
without the weight of the mattress.
You
MUST
have another person hold
down or sit on the bed to avoid the risk
of serious injury or death from the bed
slamming shut.
The pistons are now installed,
therefore, the bed will
NOT
stay down
without the weight of the mattress.
You
MUST
have another person hold
down or sit on the bed to avoid the risk
of serious injury or death from the bed
slamming shut.
