Hafco WoodMaster PJ-6B, Руководство оператора

Страница: 3 / 17

3
footwear are recommended when working outdoors. Wear protecting hair covering to contain long hair.
11. Use safety glasses and hearing protection.
Also use face or dust mask if the cutting operation is dusty.
12. Do not abuse the cord.
Never carry the tool by the cord of yank it to disconnect it from the socket, Keep the cord away from heat, oil
and sharp edges.
13. Do not overreach.
Keep proper footing and balance at all times.
14. Maintain tools with care.
Keep cutting tools sharp and clean for better and safer performance. Follow instructions for lubrication and
changing accessories. Inspect tool cord periodically and if damaged have it repaired by an authorized
service facility. Inspect extension cords periodically and replace, if damaged. Keep handles dry, clean and
free from oil and grease.
15. Disconnect tools.
When not in use, before servicing and changing accessories such as blades, bits and cutters, disconnect
tools.
16. Remove adjusting keys and wrenches.
Form the habit of checking to see that keys and adjusting wrenches are removed from the tool before turning
it on.
17. Avoid unintentional starting.
Do not carry a plugged-in tool with a finger on the switch. Ensure switch is off when plugging in.
18. Use outdoor extension leads.
When tool is used outdoors, use only extension cords intended for outdoor use.
19. Stay alert.
Watch what you are doing. Use common sense. Do not operate tool when you are tired.
20. Check damaged parts.
Before further use of tool, a guard or other part that is damaged should be carefully checked to determine
that it will operate properly and perform its intended function. Check for alignment of moving parts, free
running of moving parts, breakage of parts, mounting and any other conditions that may should be properly
repaired or replaced by an authorized service center unless otherwise indicated in this instruction manual.
Have defective switches replaced by an authorized service facility. Do not use the tool if the switch does not
turn it on and off.
21. Warning.
The use of any accessory or attachment, other than those recommended in this instruction manual or the
catalog, may present a risk of personal injury.
22. Have your tool repaired by a qualified person.
This electric tool is in accordance with the relevant safety requirements, Repairs should only be carried out
by qualified persons using original spare parts, otherwise this may result in considerable danger to the user.