Hafco TM-33170HDX, Инструкция по эксплуатации

Страница: 20 / 59

4-4 Slide
1. Slide is the saddle-shaped casting on the lathe bed, the main structure are the
saddle-shaped slide body, compound slide and the 4-way tool post. Main
function of slide is for compound slide and tool holder mounted and fixed tool
for cross and longitudinal feed operation.
2. Cutting in the longitudinal feed
Cutting in the longitudinal feed, in order to avoid the slide moving backwards,
leading to the cutting surface being uneven. It has a locking screw D on the
slides.
3. Slope cutting
Cross carriage inscribed with the mark-indicator, when do the slope cutting,
please loosen the locking Screw B, and rotating the compound rest by angle you
need, and then fixed it tightly.
4. Adjustment of the gibs
To avoid the gap caused by the long period wearing and tearing of sliding surface,
a gib for possible adjustments to eliminate the gap in each carriage; To adjust,
please loosen the end locking screw and tighten adjustment screw A first, and
adjust the wedge to maintain proper clearance, then tighten the screws.
5. Indicator The indicator moves forward 10mm revolution, could be divided
into 250, 0.04mm per graduation. When reset to zero, please loosen the screw
then fix after adjustment.
Page 20 Instruction Manual for TM-33170HDX (L646D) 26/11/2014