8
OPERATION MANUAL
2.2 SAFETY FEATURES FOR BAND SAWS
DO NOT use this machine unless you have been instructed in its safe use and the
operator has read and understands the instructions in this manual
Safety glasses must be
worn at all times in work
areas.
Sturdy footwear must be
worn at all times in work
areas.
Long and loose hair must
be contained.
Close fitting/protective
clothing must be worn.
Hearing protection must
be worn around noisy
machines
Rings and jewelry must
not be worn
PRE-OPERATIONAL SAFETY CHECKS
q
Locate and ensure you are familiar with all machine operations and controls
q
Ensure all guards are fitted, secure and functional. Do not operate if guards are missing or
faulty.
q
Check workspaces and walkways to ensure no slip/trip hazards are present.
q
Ensure the hydraulic clamping mechanism functions correctly.
q
Check that the blade is in good condition.
q
Ensure the blade’s speed, tension and tracking are properly adjusted.
q
Check coolant delivery system to allow for sufficient flow of coolant.
OPERATIONAL SAFETY CHECKS
q
Lift the head of the unit up and lock it in the upward position.
q
Set the angle of the vice or check it to ensure its squareness.
q
Clamp workpiece firmly into the vice. Long material must be supported.
q
Adjust blade guards to cover unused portion of blade.
q
Ensure hands are away from the blade, and then turn the machine on.
q
Allow the upper head assembly to come down slowly until the teeth are cutting the
material.
q
Keep hands away from the blade and cutting area.
q
Turn off the machine and bring it to a complete standstill if the blade is to be lifted out of
an uncompleted or jammed cut.
q
Stop the saw immediately if the blade develops a ‘click’, and check for a broken tooth
q
Ensure the saw bow is locked in the upward position before removing workpiece from vice
ENDING OPERATIONS AND CLEANING UP
q
Switch off the machine when work completed.
q
Reset all guards to a fully closed position.
q
Before removing scrap pieces from the vice area or making adjustments, Stop the machine
and bring it to a complete standstill.
q
Leave the machine in a safe, clean and tidy state
DON’T
q
Do not use faulty equipment. Immediately report suspect machinery.
q
Do not push down on the cutting head while it is cutting.
q
Never leave the machine running unattended.
Page 8
Instruction Manual for EB-260V (B062V)
04/04/2019
