Describing the PCS2 Device Components
2-3
P/N 85266-30, Manual revision: A
P
RESENTING
THE
PCS2
DEVICE
COMPONENTS
The components of the PCS2 device will be presented in this chapter according
to where they are located on the device:
z
The centrifuge system.
z
The cabinet components.
z
The control panel.
Figure 2-2, PCS2 top deck view
The disposable set elements will be explained in greater detail in the chapter
“Describing the PCS2 Disposable Collection Material”.
As an explanation for the references made to the disposable tubing in this
chapter:
Donor-line tubing
refers to the tubing which is either:
z
Transporting blood away from the donor before entering the bowl.
z
Transporting blood from the bowl before return to the donor.
Effluent tubing
refers to the tubing exiting the bowl in the direction of the plasma
collection container.
1. Centrifuge system
2. Line sensor
3. Weigher
4. AC pump
5. AC pump tubing guide
6. Blood pump
7. Blood pump tubing guide
8. Donor valve (red)
9. Plasma valve (yellow)
10. Saline valve (white)
11. Donor flow lights (x2)
12. ACAD (Anticoagulant air
detector).
13. BLAD (Blood line air
detector).
14. DPM (Donor pressure
monitor).
15. SPM (System pressure
monitor).
16. DLAD X 2 (Donor line air
detectors).
17. Blood filter brackets
18. Tubing guide
19. AC solution pole
20. Saline solution pole
12
18
12
5
13
14
11
8
3
9
10
15
11
2
1
7
16
20
17
19
4
6
