HAEGER Thermal Smart, Инструкция пользователя, Страница: 6 / 56

English
4 Instructions for use
5 - Then hang the square wall-mounting buckle on the back of the heater in the
wall rivet.
6 - After the product is hung on the wall, it should be pushed to the right so that
the wall rivets fall into the product's long bar fixing position.
7 - The distance between the around walls and the heater should be not less
than 30cm. Note that the wall-mounted fixing screws must be firm to prevent
the heater from falling.
IMPORTANT:
When in use, the radiator should always be kept vertical (supports
at the bottom, controls at the top). Any other position could be dangerous!
IP24: appliance protected against splashing water
The radiator is class I and has IPX4 electrical protection. In bathrooms, it can be
installed in areas 2 and 3 (see figure 1) provided that the control device is not
within reach of people using the shower or bathtub. The radiator must not be
connected to the earth lead.
C