HAEGER Elite Tower TF-R36.005A, Инструкция пользователя, Страница: 6 / 40

English - 4
−
NORMAL (standard mode) – this is the default mode of the fan. In this
mode the speed can be set according to your preferences.
−
NATURAL (natural air circulation mode) – this mode imitates natural air
circulation by alternating the fan speed.
−
SLEEP (sleep mode) – this mode is used to reduce night-time power
consumption.
REMOTE CONTROL
• Controlling the fan
Controlling the fan using the remote control is the same as using the control panel. The
symbols on the remote control correspond to the symbols on the control panel. Always
point the remote control at the fan.
•
Inserting and replacing batteries
−
Push down the battery holder lock on the underside of the remote control and slide
the battery holder out of the remote control. Insert a new CR2025 type battery into
the holder and insert it back into the remote control until you hear a click.
−
When inserting the battery, heed the correct polarity. When replacing batteries, first
remove the flat battery and then insert the new one.
Cleaning and Maintenance
1. Switch off the fan and remove the plug from the power outlet before assembling,
cleaning or maintenance.
2. Clean the plastic components by using a mild detergent and a damp cloth or sponge.
Caution: Never use aggressive detergents, chemical cleaners or solvents as they could
damage the surface of plastic components. Note: Do not use chemical, steel, wooden
or abrasive cleaners to clean the appliance.
3. Dry throughout before storage.
Warning
Under no circumstances should you immerse the device in water for cleaning purposes.
Otherwise, this might result in an electric shock or fire.