Note: The following illustration summarizes the raise, lower, and tag dump operation with relation to the
respective user interface pushbuttons and indicators.
TAG DUMP Button
Press once to exhaust the air in
the rear tag axle to low
pressure. The led indicator is
on while this axle is in dump
mode. [Speed < 20 MPH]
Press button again to refill tag
axle to normal pressure. The
led indicator is off while this
axle is normal mode.
LOWER Button
Press once to partially lower the
vehicle to decrease overall
height. [Speed < 10 MPH]
(The Lower light flashes)
or
Press and hold button until the
lower light remains “on” to
lower the vehicle to lowest
overall height. [Speed < 5
MPH
]
Press “RAISE” switch once to
return to normal height
(Lower light off)
RAISE Button
Press once to raise the rear of
the RV for increased bumper
clearance. (The Raise light
flashes) [Speed < 20 MPH]
or
Press and hold button until
raise light remains “on” to raise
entire vehicle for increased
ground clearance. [Speed < 10
MPH]
Press “LOWER” switch once to
return vehicle to normal height.
(Raise light off)
