hadewe Xantos-Nail 0872 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 16

hadewe Xantos-Nail 0872 Скачать руководство пользователя страница 3

3

Safety Instructions

Read  this  instruction  manual  in  its  entirety
before you start operating the unit. Especially
read  through  any  information  regarding  the
battery  and  recharging  process  to  prevent
damage to the accumulators.

The equipment should only be used by
trained operators.

The installation of the working area has to
correspond to the relevant regulations. Set
up the unit in such a way, that the air slits are
not blocked and the extracted air can escape
well.

Only switch on the unit, if the handpiece
rests secured in the handpiece holder, or if
you hold it safely in your hand.

To avoid the risk of electrocution only
connect the device to the mains power
supply.

If  you  pull  the  power  plug  it  will  stop  the
connection  to  the  mains  power  supply.  Set
up the unit so that the power plug is always
accessible.  The  power  switch  should  also
always be easily accessible.

Prevent  any  liquids  from  entering  into  the
control  unit,  since  this  could  damage  the
electronic elements. Clean the outside of the
box  only  with  a  damped  cloth.  Make  sure,

«
1
2
3
4
5
...
»

Содержание Xantos-Nail 0872

















Отзывы:

Нет отзывов