3
Safety instructions
Read this instruction manual in its entirety before you
start operating the unit. Especially read through any
information regarding the battery and recharging
process to prevent damage to the accumulators.
The equipment should only be used by trained
operators.
The installation of the working area has to correspond
to the relevant regulations. Set up the unit in such a
way, that the air slits are not blocked and the extracted
air can escape well.
Only switch on the unit, if the handpiece rests secured
in the handpiece holder, or if you hold it safely in your
hand.
To avoid the risk of electrocution only connect the
device to the mains power supply.
If you pull the power plug it will stop the connection to
the mains power supply. Set up the unit so that the
power plug is always accessible. The power switch
should also always be easily accessible.
Prevent any liquids from entering into the control unit,
since this could damage the electronic elements.
Clean the outside of the box only with a damped cloth.
Make sure, that you have unplugged the unit before.
