Wipe completely dry before replacing the shelves and baskets.
Thoroughly dry all surfaces and removable parts before putting them
back into place. This appliance manually defrosts, a layer of frost
may occur on the fridge compartment’s interior walls if the fridge
door is opened frequently or kept open too long. If the frost is too
thick, choose a time when the fridge is nearly empty and proceed as
follows:
1. Remove existing food and accessories baskets, unplug the
appliance from the main power and leave the doors open. Ventilate
the room thoroughly to accelerate the process.
2. When defrosting is completed, clean your fridge as described
above.
Warning!
Do not use sharp objects to remove frost from the freezer
compartment. Only after the interior is completely dry should the
appliance be switched back on and plugged back into the main
socket.
Door seals cleaning
Take care to keep door seals clean. Sticky food and drinks can
cause seals to stick to the cabinet and tear when you open the door.
Wash seal with a mild detergent and warm water. Rinse and dry it
thoroughly after cleaning.
Caution! Only after the door seals are completely dry should the
appliance be powered on.
Replacing the LED light
Warning: The LED light must be replaced by a competent person. If
the LED light is damaged, follow the steps below:
1. Unplug your appliance.
2. Remove light cover by rising up and pulling out the LED light.
www.haden.com
021
Содержание HUR120I
Страница 30: ......
