Haden HCTT60, Инструкция по эксплуатации

Страница: 9 / 28

• A suitable isolating switch providing full disconnection from the
mains power supply is incorporated in the permanent wiring, mounted
and positioned to comply with the local wiring rules and regulations.
• The isolating switch must be of an approved type and provide a 3 mm
air gap contact separation in all poles.
• The isolating switch will be easily accessible to the customer with
the hob installed.
• You use heat-resistant and easy-to-clean finishes (such as ceramic
tiles) for the wall surfaces surrounding the hob.
www.hadenappliances.com www.hadenappliances.com
09
AFTER INSTALLING THE HOB, MAKE SURE THAT
• The power supply cable is not accessible through cupboard doors or
drawers.
• There is adequate flow of fresh air from outside the cabinetry to the
base of the hob.
• If the hob is installed above a drawer or cupboard space, a thermal
protection barrier is installed below the base of the hob.
• The isolating switch is easily accessible by the customer.
BEFORE LOCATING THE FIXING BRACKETS
The unit should be placed on a stable, smooth surface (use the
packaging). Do not apply force onto the controls protruding from the
hob