Haden 204486, Инструкция по эксплуатации

Страница: 4 / 9

www.haden.com www.haden.com 6 7
To ensure the first cup of coffee tastes excellent, you should
rinse the coffee maker with warm water as follows:
•
Fill the water tank, the water level should not exceed the
“MAX” mark in the tank. Then close the water tank cover.
Note: this coffee machine is supplied with a detachable
tank for easy filling and cleaning.
• Insert the coffee filter into the porta-filter (no coffee in the
filter), make sure to align the notch on the filter with the
groove inside the porta-filter. Turn the filter to the left or
right to lock in place.
•
Connect the porta-filter to the dock and turn it anti-
clockwise until it is fixed tightly. The porta-filter handle
should be pointing forwards.
•
Place a cup on the removable shelf. Make sure the steam
control knob is in the OFF position.
•
Connect to power source, press the ON/OFF button to
turn on the machine. The blue power indicator will be
illuminated.
• Press the
coffee button
, the pump will pump water.
When there is water flowing out, close the pump by pressing
the
coffee button
again.
•
Press the
steam button
and wait for a moment. The
appliance will begin preheating until coffee button is
illuminated, this means the preheating has finished.
•
Press the coffee button , water will flow out.
•
After water has flowed for 1 minute, press the coffee button
, you can pour out the water from the cup then clean
them thoroughly, now you can start brewing coffee.
Note: There may be noise when pumping the water for the first
time, it is normal, the appliance is releasing the air inside.
After about 20s, the noise will disappear.
BEFORE FIRST USE PREHEATING
To make a cup of good hot Espresso coffee, we recommend you
preheating the appliance before making coffee, including the
porta-filter, coffee filter and cup, so that the coffee flavour can
not be influenced by the cold parts.
•
Remove the detachable tank and fill it with desired water,
the water level should be between the “MAX” mark and
the “MIN” mark in the tank. Then insert the tank into the
appliance properly.
•
Insert the coffee filter into the porta-filter (no coffee in the
filter), make sure to align the notch on the filter with the
groove inside the porta-filter. Turn the filter to the left or right
to lock in place.
•
Connect the porta-filter to the dock and turn it anti-clockwise
until it is fixed tightly. The porta-filter handle should be
pointing forwards.
• Place an espresso cup on removable shelf.
•
Connect the appliance to power supply. Make sure the steam
control knob is on the OFF position.
•
Press the ON/OFF button to turn on the unit, the power
indicator turns on and the coffee button indicator will
start blinking. After finish preheating, the coffee indicator
light stops blinking and turns solid blue.
•
Press the coffee button , when there is water flowing out
close the pump immediately. The purpose of the step is to
pump the water of the tank into the housing.
• Wait for the
coffee button
to illuminate, you should press
the
coffee button
again, there will be hot water flowing
out.
•
After water has flowed filling the cup, press the coffee button
again to stop the flow. The preheating has finished.