background image

 

 

 

 

5.52.162.00.01.05 

 

 

 

2.3 

Requirements for the operating personnel 

  The units may only be operated by qualified persons that are appropriately trained and that are familiar with 
it. They must have their employer’s authorization for operation of the units. 
Before  starting  work,  the  operating  personnel  must  have  read  the  operating  and  installation  instructions, 
especially the chapter "Safety Instructions". 

This  is  especially  important  for  operating  personnel  that  rarely  uses  the  equipment,  i.e.  for  installation  or 
maintenance work. 

   

DANGER!

 

In order to avoid severe injury, please pay attention to the following when using the equipment: 

  Use protective clothes/equipment. 

  Do not wear long hair hanging down open. 

  Do not wear rings or other jewelry. 

  Do not wear clothes that are too big/wide. 

  Do not reach into ropes, chains, drive parts or other moving parts with your hands 

 

 

2.4 

Appropriate use 

The permitted safe working load of the devices must not be exceeded! An exception can be made during the 
load test before initial operation, carried out by a licensed qualified person. 

 

 

  The permissible ambient temperature during operation of manual driven devices is -20 ° C / + 50 ° C and 

at all power driven devices -20 ° C / + 40 ° C! 

  Defective  devices  and  load  suspension  devices  must  not  be  used  until  they  have  been  repaired!  Only 

original spare parts must be used. Non-compliance will result in any warranty claims becoming void. 

  Liability and warranty will become void if unauthorized modifications of the units are made by the user! 

 

The  appropriate  use  of  the  hoists  is  vertical  lifting  and  lowering  of  unguided  loads.  In  combination  with 
trolleys, loads can also be moved horizontally. 

 

 

   

DANGER!

 

It is not allowed: 

 

  pulling loose of stuck loads, dragging of loads and inclined pulling is not allowed.  

  in explosive atmosphere, except the unit is especially modified for it and marked by an indication label 

  In reactor containment vessels. 

  to transport people  

  The device is not suitable for use on stages and in studios 

   persons must not stand under a suspended load 

 

 

 

 

NOTICE!

 

If the units are not used appropriately, it is not possible to ensure safe operation. 

The  owner  and  operator  have  sole  liability  for  all  personal  injury  and  damage  to  property  arising  from 
inappropriate use. 

 

2.5 

Basic safety measures 

  Observe installation-, operation and maintenance instruction. 

  Take notice of caution notes at units and in the manual 

  Observe safety distances. 

  Take care for a free view on the load. 

  Only use the hoists appropriately. 

  The equipment is to be used exclusively for movement of goods. Under no circumstances my persons be 

moved. 

  Never load the devices beyond their working load limit. 

  Pay attention to the accident prevention regulations (UVV). 

  Should the hoist be used outside of Germany, please pay attention to the national regulations that apply. 

Содержание 21/12


















Отзывы: