Hach Sigma 900 MAX, Руководство пользователя

Страница: 36 / 122

36
Installation
4.6 Setting up the bottles
4.6.1 One-bottle sampling
For single bottle composite sampling, install the Full Bottle Shut-off (refer to 4.8 on page
40 ). Place the bottle in the center of the bottle tray ( Figure 20 on page 41 ). The Full Bottle
Shut-off positions the sample tubing over the bottle mouth.
4.6.2 Two- and four-bottle sampling
For two-bottle sampling, install the distributor ( Installing the distributor on page 38 ). Place
the bottles in the Bottle #1 and Bottle #2 positions in the tray as shown in Figure 15 .
For four-bottle sampling, install the distributor and place all four bottles in the tray as
shown in
Figure 15 .
4.6.3 Eight-bottle sampling
For eight or 24-bottle sets, install the distributor (refer to section 4.7 on page 38 ). Place
the bottles in the tray and install the proper bottle retainer ( Figure 16 ).
Bottle #1 is the first bottle clockwise (looking down on the tray) from the right side of the
tray. Bottle #1 is located on the inside of each bottle tray for all multiple bottle sets.
Figure 15 Two or four bottle installation
1 Tray 3 10-liter (2.5-gal) plastic or glass bottles (4x)
2 10-liter (2.5-gal) plastic or glass bottles (2x) 4 Front of sampler
Goodnal STP ST041 Pre Treatment (Sigma 900 MAX All Weather Refrigerated Sampler) Vendor Manual
Q-Pulse Id VM373 Active 29/10/2013
Page 36 of 122