Hach sc1000, Руководство пользователя

Страница: 42 / 64

42
Operation
5.1.3 Using the Menu Windows
If the Menu button (from the pop-up toolbar) is selected, the Main Menu screen is opened.
The Main Menu screen allows the user to view the sensor status, configure the sensor
setup, system setup, and perform diagnostics. The menu structure may vary depending
on the configuration of the system.
Figure 38 Main Menu
5.1.3.1 Navigating the Menu Windows
To view a menu item, touch the menu item or use the
UP
and
DOWN
keys to highlight the
item. The menu item remains highlighted for approximately 4 seconds after it is selected.
To view the highlighted command, select the area to the left of the menu item or select the
ENTER
button.
A “+” next to a menu command indicates there is a submenu. Touch the “+” to view the
submenu. An “i” next to a menu command indicates it is information only.
If a menu item is editable, highlight the item and touch the far-left part of the menu item
until it is highlighted and press
ENTER
or double-tap the highlighted item. A keypad will be
displayed to change an entry ( Figure 40 on page 43 ) or a list box will be displayed
( Figure 41 on page 44 ).
Messages are displayed in the message window ( Figure 42 on page 44 ).
1. Display Area
2.
BACK
3.
FORWARD
4.
ENTER
–confirms the entry or selection.
5.
HOME
–changes to the display of measured values. The pop-up toolbar cannot open from the menu window. To view the
Main Menu from this display, touch the Home button and then the bottom of the screen.
6.
UP
–scrolls up
7.
DOWN
–scrolls down
MENU
SENSOR STATUS
SENSOR SETUP
SYSTEM SETUP
TEST/MAINT
1
6
7
2 3 4 5
客服：400 688 9809
网址：www.mamots.com 电话：0431-85178766