Hach PAT700 DS, Основное руководство пользователя

Страница: 10 / 192

Figure 3 Wall mount
Attach the instrument to dual pipes
Refer to Figure 2 on page 9 for dimensions. Refer to Figure 4 for installation.
• Attach the analyzer mounting bracket to two instrument pipes that are attached to a common
surface. Do not attach the instrument to two instrument pipes that could move independently.
• Use pipes that extend at least 254 mm (10 in.) from the same rigid base.
• Use pipes with a diameter of 50.8 mm (2 in.) or less.
• Use four user-supplied 5/16-inch U-bolts (two for each 2-inch pipe) and eight user-supplied
matching nuts. Use U-bolts and nuts that can withstand the process environment.
• Use U-bolts and nuts that do not extend more than 15 mm (0.60 in.) from the inside of the bracket.
Figure 4 Pipe installation
10 English