Hach MET ONE 3400 Series, Руководство пользователя

Страница: 37 / 48

Use existing data
The Test and Report Wizard can include existing date for the selected standard and location.
1. Select the Use Existing Data checkbox.
2. Enter the date range for the existing data.
3. Push BEGIN SAMPLING .
Report test results
• Push to send the selected data to a USB drive. Refer to Export data on page 37.
• Push to print the selected data. Refer to How to use the Print Center on page 35.
How to use the Print Center
About the Print Center
N O T I C E
To avoid damage to the printer, do not operate the printer without paper. If the particle counter must be used
without paper, be sure to set the print mode to "None".
The particle counter has a built-in printer. The Print Center screen is accessible from the:
• Counter Navigation screen
• Historical screen
• System Diagnostics screen
• Test/Report Wizard screen
• Area/Location Setup screen
On the Print Center screen the user can:
• Set automatic print functions
• Print buffer records or count averages
Note: Filtered data is printed from the Historical screen.
Print records manually
The buffer holds 5000 records maximum. The Print Center can print the entire buffer or the average
of count cycles. To print records manually:
1. On the counter Navigation screen, push PRINTER.
2. On the Print Center screen, select the print option for the data.
• Push AVERAGE to print the average of each size channel for the last sample measurement.
Refer to Figure 6 .
• Push BUFFER to print all of the records in the buffer. Refer to Figure 7 .
3. The data will begin to print.
• To cancel the print job, push CANCEL PRINT .
• To return to Counter Navigation, push RETURN .
English 35