Hach LZV902, Руководство пользователя

Страница: 6 / 55

English 6
7. Start the measurement by pressing Read Carousel 1 .
The first carousel insert is measured and the results displayed.
8. Remove the carousel insert or cells and load carousel insert 2 with
samples.
9. Start the measurement by pressing Read Carousel 2 .
The second carousel insert is measured and the results displayed.
Continue until all samples have been measured.
Note: If Instrument Setup > Data Log Setup > Auto Store: On has
been selected, all measurement data is automatically saved. The
measurement data can be accessed under Recall data > Data Log.
Import an external sample ID
1. Create an external sample ID list with a spreadsheet program.
Four columns are permitted; column 1 contains the sequential
number, column 2 the sample designation, columns 3 and 4 are
optional.
Headings and comment lines must begin with #.
2. Create a folder named "SampleID" on a USB stick or in your
established network.
3. Save the sample ID list in CSV or UNICODE-TXT format in the
"SampleID" folder with
Save as .
4. Connect the DR6000 to the USB stick or network.
All *.TXT and *.CSV files in the SampleID folder will be displayed for
selection.
5. Select the desired file with OK .
6. Transfer the displayed sample ID list with Done .
Single wavelength
1. Press Single Wavelength in the main menu.
2. Press Options > More > Reading mode .
3. Select Carousel 1 inch square or Carousel 10 mm square .
4. In the toolbar, select the symbol for the carousel insert. This symbol
opens a window with carousel options; refer to
Table 2 .
Table 2 Carousel options
Options
Carousel 1 inch
square
Options
Carousel 10 mm
square
Description
Zero 1 Read 1–5 Zero 1 Read 1–7
Position 1 zero solution, from position 1 to
5 (or 7) samples
Measurement stops after the zero
measurement. Afterwards, the carousel
insert is measured one a work step.
Zero 1–5
Read 1–5 Zero 1–7
Read 1–7
Position 1 to 5 (or 7) zero solutions,
position 1 to 5 (or 7) samples.
Measurement stops after all zero
measurements. Afterwards, the samples
are measured in a further work step.
Zero 1 Read 2–5 Zero 1 Read 2–7
Position 1 zero solution, from position 2 to
5 (or 7) samples.
Carousel insert is measured in one work
step.
Zero 1, 3
Read 2, 4 Zero 1, 3, 5
Read 2, 4, 6
Always alternating. First zero solution,
then sample.
Carousel insert is measured in one work
step.