Hach EC1000, Инструкция по эксплуатации

Страница: 48 / 128

48
ALARMS (continued)
A2S <=(-2 to 16 for pH,
±
2000 for mV,
-5.0 to 105.0 for temp)>
Recall or set alarm 2 setpoint for current alarm type Value (on recall); OK (on set)
A2H <=(0.01 to 2 for pH,
1 to 100 for mV, 0.1 to 2
for temp)> Recall or set alarm hysteresis for current alarm mode Value (on recall); OK (on set)
A2D <=(0 to 30)> Recall or set alarm 2 delay time Value (on recall); OK (on set)
ALO Toggles alarm lockout status and responses with the
new status Locked or Unlocked
RWN Recall system warnings Print warnings followed by OK
CWN Clears system warning OK
PRINTER
LST List Setup Print Setup
PIV <=(0 to 99)> Recall or set print interval Value (on recall); OK (on set)
Table 6 RS-232 Remote Commands (continued)
Code Function Response