Hach ANATEL PAT700, Руководство оператора

Страница: 110 / 158

Page 100 Bottle Mode – PAT700 Total Organic Carbon Analyzer
Operator Manual
Anatel
WG
M - 2
8
No
vemb
e
r 20
07
- Ed
it
io
n 0
1
The excursion sample dialog box displays the analyzer’s serial number, the date and time of
the excursion, the TOC value, and the oxidation curve filename.
Export icon opens the export sample dialog box. See Figure 6-23 . From there, you can
export the oxidation curve file to a USB flash drive.
Yes icon (containing checkmark) returns you to the load bottles dialog box.
Cancel icon takes you to the unload/replace bottles dialog box.
Excursion without validation
CAUTION
Potential puncture hazard! Contact with the exposed needle could cause serious
injury. Use extreme care when installing and removing the sample bottles.
1) Install the standards bottles following the instructions as shown in the load bottles
dialog box and ensuring that you place the standards bottle in the correct position.
See
Figure 6-29 . From left:
• Bottle 1 = empty
• Bottle 2 = empty
• Bottle 3 = empty
• Bottle 4 = excursion bottle
Figure 6-29 Excursion mode without validation dialog box
• Bottle positions graphics show you where to install the bottle.
• Unlock icon energizes the bottle bay door lock for five seconds, allowing you to
open the door.
• Back icon takes you to the excursion mode dialog box.
• Forward icon takes you to the excursion mode setup dialog box.