background image

 

 

Electrical equipment marked with this symbol may not be disposed of in European 
public disposal systems after 12 August of 2005. In conformity with European local 
and national regulations (EU Directive 2002/96/EC), European electrical equipment 
users must now return old or end-of life equipment to the Producer for disposal at no 
charge to the user. 

Note: For return for recycling, please contact the equipment 

producer or supplier for instructions on how to return end-of-life equipment for proper 
disposal. 

Important document. Retain with product records.  

GERMAN 

Elektrogeräte, die mit diesem Symbol gekennzeichnet sind, dürfen in Europa nach 

dem 12. August 2005 nicht mehr über die öffentliche Abfallentsorgung entsorgt werden. In 
Übereinstimmung mit lokalen und nationalen europäischen Bestimmungen (EU-Richtlinie 
2002/96/EC), müssen Benutzer von Elektrogeräten in Europa ab diesem Zeitpunkt alte bzw. zu 
verschrottende Geräte zur Entsorgung kostenfrei an den Hersteller zurückgeben. 

Hinweis: 

Bitte wenden Sie sich an den Hersteller bzw. an den Händler, von dem Sie das Gerät bezogen 
haben, um Informationen zur Rückgabe des Altgeräts zur ordnungsgemäßen Entsorgung zu 
erhalten. 

Wichtige Informationen. Bitte zusammen mit den Produktinformationen aufbewahren. 

FRENCH 

A partir du 12 août 2005, il est interdit de mettre au rebut le matériel électrique 

marqué de ce symbole par les voies habituelles de déchetterie publique. Conformément à la 
réglementation européenne (directive UE 2002/96/EC), les utilisateurs de matériel électrique 
en Europe doivent désormais retourner le matériel usé ou périmé au fabricant pour élimination, 
sans frais pour l’utilisateur. 

Remarque : Veuillez vous adresser au fabricant ou au fournisseur 

du matériel pour les instructions de retour du matériel usé ou périmé aux fins d’élimination 
conforme. 

Ce document est important. Conservez-le dans le dossier du produit.  

ITALIAN 

Le apparecchiature elettriche con apposto questo simbolo non possono essere 

smaltite nelle discariche pubbliche europee successivamente al 12 agosto 2005. In conformità 
alle normative europee locali e nazionali (Direttiva UE 2002/96/EC), gli utilizzatori europei di 
apparecchiature elettriche devono restituire al produttore le apparecchiature vecchie o a fine 
vita per lo smaltimento senza alcun costo a carico dell’utilizzatore. 

Nota: Per conoscere le 

modalità di restituzione delle apparecchiature a fine vita da riciclare, contattare il produttore o il 
fornitore dell’apparecchiatura per un corretto smaltimento. 

Documento importante. Conservare 

con la documentazione del prodotto.  

DANISH 

Elektriske apparater, der er mærket med dette symbol, må ikke bortskaffes i 

europæiske offentlige affaldssystemer efter den 12. august 2005. I henhold til europæiske 
lokale og nationale regler (EU-direktiv 2002/96/EF) skal europæiske brugere af elektriske 
apparater nu returnere gamle eller udtjente apparater til producenten med henblik på 
bortskaffelse uden omkostninger for brugeren. 

Bemærk: I forbindelse med returnering til 

genbrug skal du kontakte producenten eller leverandøren af apparatet for at få instruktioner 
om, hvordan udtjente apparater bortskaffes korrekt. 

Vigtigt dokument. Opbevares sammen 

med produktdokumenterne.  

 

Form No 011229 

Содержание MET ONE HHPC-6




















































Отзывы: