Hach Ultra MET ONE HHPC-2, Руководство пользователя, Страница: 16 / 42

15
Section 4 Operation
4.1 Install the MET ONE HHPC–2 utility software
To install the MET ONE HHPC–2 utility software:
1. Connect the MET ONE HHPC–2 to the communications port on the PC using the
RS232 modular cable (VP894408).
2. Connect the DB9 to the RJ45 converter (SA000070–01).
3. Insert the MET ONE HHPC–2 utility software (CSVDownloadUtility) diskette into the
drive.
4. Copy CSVDownloadUtility.exe and CSVDownloadUtility.ini from the diskette to a
working directory on the PC. If the communications port to be used is other than
Com1, open CSVDownloadUtility.ini and change Port=Com1 to Port=ComX (where X
represents the number of the port to use.)
5. To open the utility software, double-click the CSVDownloadUtility.exe file. The
CSVDownloadUtility window is displayed (refer to
Figure 6 on page 15 ).
6. Follow the instructions in the Readme.txt file on the diskette to install the software.
4.2 Start up
Press and hold the
POWER
button on the right of the display of the MET ONE HHPC–2 to
turn on the unit. When the MET ONE HHPC–2 is powered on, the MET ONE Opening
screen is displayed briefly followed by the Main screen.
4.3 Display and keypad
The MET ONE HHPC–2 features a Liquid Crystal Display (LCD) with a keypad at the
bottom. Power on the unit and the MET ONE Opening screen displays briefly, followed by
the Main screen.
Note: If the MET ONE HHPC–2 does not power up, double-check the AC connection or the battery
power. To charge the battery, refer to section 5.1 on page 25 .
Figure 6 MET ONE HHPC-2 Utility (CSVDownloadUtility) window