HACH LANGE ORBISPHERE 3650, Руководство пользователя

Страница: 15 / 48

13
Installation
3.3 Sample tube adapter (optional)
A model 32051 sample tube adapter can be attached to the flow chamber's inlet tubing. This
adapter, in turn, attaches to 6 mm or ¼ inch stainless steel or flexible tubing using rubber gasket
model 32813 (or, for 8 mm tubing, rubber gasket model 32814).
The tightening ring provides a compression fitting to the sample tube.
3.4 WinLog97 PC program installation
Install the WinLog97 program onto the PC by inserting the accompanying CD into your PC and
running the SetUp program. Simply follow the on-screen instructions.
When finished, a new Windows Program Group labeled
Orbisphere
is created containing the
software and help files.
3.5 Connections
3.5.1 External power (optional)
The instrument is usually powered by the batteries supplied. You can, however, power it from an
ex5VDC source (as supplied by an electronics supply store). Connect the 2-wire output
from this source, using a model 28083 male 6-pin LEMO plug, to the RS-232 connector on the
right side of the instrument.
Figure 4 32051 Sample Tube Adapter with Check Valve from Flow Chamber
Figure 5 External Power Connection
LEMO-6
Pin
Description
Pin 1 Not used
Pin 2 Not used
Pin 3 Not used
Pin 4 Not used
Pin 5 Ex5VDC voltage input
Pin 6 Ground