Habitat Tahra 826634, Руководство по сборке

Страница: 2 / 26

Tahra
– 05/2022 1
B
EN
This manual contains important information that should be kept
for future reference.
Self-assembly.
Warning! Keep children away from the assembly area. Leave the
plastic bags out their reach. The small parts pose a choking
hazard.
Materials
Stucture: oak veneered chipboard lacquered (Quercus robur,
origin: Croatia).
Drawers: oak veneered chipboard and oak veneered MDF lac-
quered (Quercus robur, origin: Croatia).
Decorative wheels: solid oak lacquered (Quercus robur, origin:
Croatia).
Assembly instruction
Before beginning assembly, identify all components using the
manual.
In order not to mislead components, do not throw the packaging
before completing the full assembly.
This product must be installed by an adult.
Plan to assemble the furniture as near as possible to where it will
be installed.
Do not use a power screwdriver as it may damage the panels.
Once mounted, this is not removable.
Assemble on a clean, flat surface.
Recommendations for use
This product is designed for indoor use only.
Do not sit on the product.
Do not stand on the product.
Do not overload drawers.
The wood-based products, particle board, painted, varnished and /
or lacquers may emit an odor when opened. This smell disappears
after a few weeks if the room is properly ventilated.
Maintenance
Remove dust regularly with a dry cloth.
Clean with a soft, damp cloth. Then wipe with a clean dry cloth.
Wipe up spills immediately with a clean, dry cloth.
To prevent scratching, do not use a sponge or recurrent grains
detergent.
Do not use abrasive products.
The use of special products for the wood is not necessary or
recommended.
Do not place the product near a heat source (radiator, fireplace,...)
nor a moisture source. Heat and humidity may damage the
product.
In order not to damage the surface, it is recommended not to
deposit hot nor wet items directly on the top.
To avoid the appearance of marks, do not leave stationary object
for more than two months.
Clean with movements in the direction of the wood fibers.
To restore the luster to varnishes, passing a woolen cloth soaked
in a mixture of equal parts household alcohol and linseed oil.
Keep the label with lot number, it may be useful in case of
complaint.
If you have any comments or suggestions regarding this product,
assembly instructions or service received, please enquire at your
nearest store or contact us on our website at:
www.habitat-
design.com or write to this address: HABITAT, 70 AVENUE
VICTOR HUGO, 93300 AUBERVILLIERS FRANCE.
The packaging elements are to be sorted out according to local
requirements. Make the right sorting choice and give them a
second life!
By sorting out this manual you contribute in preserving the envi-
ronment. This manual can still be found on www.habitat-
design.com.