Habitat Nathan 820806, Быстрый старт, Страница: 3 / 12

Nathan
- 03/2023 2
BC
Keep the label with lot number, it may be useful in case
of complaint.
If you have any comments or suggestions regarding this product,
assembly instructions or service received, please enquire at your
nearest store or contact us on our website at: www.habitat-design.
com or write to this address:
HABITAT, 70 AVENUE VICTOR HUGO,
93300 AUBERVILLIERS FRANCE.
EN
This manual contains important information that should be kept
for future reference.
Self-assembly.
Warning! Keep children away from the assembly area. Leave the
plastic bags out their reach. The small parts pose a choking hazard.
Material
Structure: powder coated iron.
Box and shelf: medium density fibreboard (MDF) birch veneer
laquered.
Top: tempered glass.
Assembly instructions
In order not to lose components, do not throw the packaging before
completing the full assembly.
Before beginning assembly, identify all the components using the
manual.
This product must be assembled by an adult.
Plan to assemble the product as close as possible to where it will
be installed.
Assemble on a clean, flat surface.
Do not use an electric screwdriver.
Recommendations for use
This product was designed for indoor use only.
Do not stand on the product.
Do not sit on the product.
Beware of sharp objects.
The wood-based products, particle board, painted, varnished and /
or lacquers may emit an odor when opened. This smell disappears
after a few weeks if the room is properly ventilated.
Maintenance
Dust regularly with a dry cloth.
Do not place the product near a heat source (radiator, chimney,
etc.) or a source of moisture. Heat and moisture can damage the
product.
Do not use abrasive products.
Wooden parts
Clean with a soft, damp cloth. Then wipe with a clean, dry cloth.
Sponge up spilled liquids immediately with a clean, dry, dabbing
cloth to absorb the liquid.
In order not to damage the surface, it is recommended not to depo-
sit a hot or humid object directly on it.
Do not use magazines or newspapers as a trivet. The ink used may
leave traces that can permanently stain the surface of the furni-
ture.
To avoid the appearance of marks, do not leave any object immobile
for more than 2 months.
The use of special products for furniture is not recommended or
even necessary. Clean the veneer with a soft, damp cloth. Then
wipe with a dry cloth.
Maintain with movements in the direction of the wood fibers.
Glass part
Clean with a glass cleaner and a soft cloth, then wipe with a dry,
clean cloth.
Maintain with gentle and circular movements.
Do not put in direct contact with objects that could scratch the
surface.
Do not hit the glass with a hard or sharp object.
Metal part
Clean with a soft, damp cloth.
To avoid scratches, do not use a recurring sponge or grain
detergent.
Maintain with gentle and circular movements.
The packaging elements are to be sorted out according to local
requirements. Make the right sorting choice and give them a
second life!
By sorting out this manual you contribute in preserving
the environment. This manual can still be found on
www.habitat-design.com.