habitat et jardin Vana 5, Руководство пользователя

Страница: 7 / 8

Model
EN
This Manual applies to all induction charged LED floating Ball:
Specification
Our LED floating Ball products are manufactured to an international standard (IP67) to protect against dust and water. This
means that they can be used outdoors and float on water, but can not charge near or in pools, provided that they are used in
accordance with this Instruction Manual. This product is made of white polyethylene.
Ambient temperature for operation:
-14˚ C to 35˚C
LEDs: 18 x RGB LEDs
Battery: Lithium battery(1x3.7V,2000mAH)
Remote control battery: CR2025 (3V)
Remote control effective distance:
4~8 meters
Charging time: 6 to 8 hours
Operation time: 4 to 10 hours depends on color mode
Charger: Input: AC100-240V
Output: DC7.5V 0.6A (CE/ROHS
approved)
Warning and caution
-These products and their packaging are not toys; please keep out of reach of children.
-The remote control ,Charging plate and charger are not waterproof and must be kept in a dry location at all times and not be
used outdoor, not exposed to rain, humidity, any liquid, or heat.
-Only use the attached charger with product to charge.
-Never charge the product in a pool, water or rain; charge in a dry, indoor location.
-Disconnect the charger from outlet when not in use.
-Do not stand ,or jump on this product.
-Do not sit on this product if it is cracked or damaged.
-Keep the product away from chemicals and heat.
-Do not attempt to open the product and its accessories.
-It is recommended that to turn off the product after use, rinsed using clean water and dried using a soft cloth.
-Do not put under direct sunlight when not in use.
Operation
Charging your new Product
Charge the battery for 6 to 8 hours before use by:
-Plug charger into “DC charging port” of charging plate as shown in below Photo 1:
-Connecting the charger to the electrical outlet (the charging indicator light shown in photo 2 will light up red to
indicate that charging is working until it turns to green when fully charged).
Your LED floating Ball is now ready for use.
To turn on/off the product by pressing and holding bottom ON/OFF switch for 2 seconds or directly pressing ON/OFF button on
remote control.
Photo 1 Photo 2
DC Charging port
Charging indicator light