Habey HB131, Руководство пользователя

Страница: 30 / 57

HABEY HB131
Intel Cedar Trail Powered Mini-ITX Motherboard
24
1
）
System power LED pins (pin1, pin2 for PWLED)
Connect system power LED cable with these pins.
（
pin 1 is LED anode
）
When system is power
on, power LED is on
；
when system is power off, power LED is off.
2
）
HDD LED Pins
（
Pin 3/4: HDD LED
）
Case panel comes with one HD LED indicating HD status. When HD read and write, the LED
will flash, indicating the device is working. Connect the LED cable to the LED pins ( Pin3 is LED
anode).
3
）
Buzzer Pins (pin 5, pin6 for SPEAKER)
External Pin for Speaker
4
）
Reset Button Pins
（
Pin 7, Pin8 for RESET BUTTON
）
Connect the reset button cable to these two pins. When system fails, reset button can make the
system continue to work and no need to turn on / off the power.
5
）
Power ON/OFF Pins
（
Pin 9, Pin10 for POWER BUTTON
）
Connect these two pins to the bounce switch on the chassis to connect or disconnect the
power supply.
2.5.14 SO-DIMM Slot
Onboard one single channel SO-DIMM slot supports DDR
Ⅲ
800/1066 MHz RAM up to 4GB.
2.5.15 Expansion Interface
（
PCI, MINI_PCIE)
Board provides one standard PCI slot and one MINI-PCIe slot.
Note: Please follow the instructions below to connect Motherboard & PCI adapter
card and PCI card installation. Please check the cables and PCI card installation before
connecting power supply, otherwise, the motherboard or PCI card will be damaged or
burned.
PCI card installation: The PCI card connecting finger has two notches. When installing the PCI
card, please make sure the PCI notch that is far away from the IO is aligned with the fool-proof
buckles of the PCI socket.