HABCO® TECHNICAL DOCUMENT C097535 - 10803169
© HABCO Manufacturing Inc. “HABCO” and HABCO Edge Logo are registered trademarks of HABCO Manufacturing Inc. Domestic and International Patents. Page 2
HABCO® COMMERCIAL HOLDING FREEZERS
SAFETY, INSTALLATION AND INSTRUCTION MANUAL
MODELS: SF28, SF24SX, SF28M SF28SX, SF46SX, SF46M
HABCO Management Systems are Certified to ISO 9001-2008.
LANGUAGE: Translation of this document is completed with the utmost care,
utilizing the resources of an ISO 9001 Certified Translation firm. In rare instanc-
es where translation is imperfect or imprecise, the parent English document
will take precedence.
IMPROPER OR UNSAFE
use of this appliance other than intended by
the manufacturer, can result in death, serious bodily injury, property
damage and/or appliance damage!
This manual contains important information about product safety.
Read and understand this manual BEFORE operating the appliance.
Please keep this manual available for other users and owners before
they use the appliance. Store this manual in a secure location.
WARNING
INTENDED USE
HABCO® Commercial Freezers are designed for the commercial fro-
zen holding storage, merchandising and display.
Not
intended for flash
freezing of non-frozen products.
Not intended for use in outdoor, direct
sun, damp, extreme heat and/or cold conditions.
MEANINGS OF SIGNAL WORDS AND SYMBOLS
WARNING
indicates potentially hazardous situations which,
if ignored, could result in death or serious injury.
WARNING
indicates potentially hazardous situations which,
if not avoided, may result in minor or moderate injury.
NOTICE
emphasizes essential information or that which may
cause appliance damage or environmental harm.
Table of Contents
Section
Subject
Page
INFORMATION AND TABLE OF CONTENTS ......................
2
SAFETY .............................................................................
3
A.
INSPECTION & UNPACKING ............................................
4
B.
CASTER KIT INSTALLATION (Optional) ..............................
4
C.
LOCATION
........................................................................
4
D.
ELECTRICAL
......................................................................
4
E.
START-UP .........................................................................
5
F.
DIGITAL CONTROLLER ......................................................
5
G.
LIGHTING .........................................................................
6
H.
DOORS .............................................................................
6
I.
PREVENTATIVE MAINTENANCE
.......................................
7
J.
CLEANING PROCEDURES .................................................
8
K.
TROUBLE-SHOOTING .......................................................
9
Glossary
Term
Explanation/Alternate Term
Commercial Freezer
Appliance
Froze Space Merchandiser™
HABCO® Freezer Merchandiser
Compressor
Refrigerant Compressing Motor Mounted in Base of Holding Freezer
Condensate
Moisture extracted from air, introduced into cabinet at location, and transformed into water by cooling
Condensing Chamber
Compressor and Condenser Coil Enclosure at Base of Cabinet
Dedicated Power Supply
Wall receptacle is wired directly to breaker, with respective power supply for model, with nothing else being powered by same circuit
Digital Controller
Thermostat which controls refrigeration on/off cycle and defrost cycle while monitoring diagnostics and trouble alarms
Evaporator (Coil)
Cooling Coil to Ceiling of Cabinet Interior
Evaporator Housing
Cooling Coil Enclosure Surrounding Evaporator Coil, Mounted to Ceiling of Cabinet Interior
Free&Clear™ Condenser (Coil)
Circular Formed Heat Exchange Coil Mounted in Base of Cabinet
LED Lighting
Light Emitting Diode Lighting system is long-lasting and energy efficient
Lint-Tolerant
Condenser (Coil)
Heat-Exchange Coil Mounted at Front Base of Cabinet
Mechanically Fastened Areas
Areas Requiring a Tool to Access
Owner
Person or Company Holding Legal Title to Appliance
Product Temperature Temperature of product within the appliance is average of high and low temperatures displayed on digital readout
Return Air Temperature
Temperature used by refrigeration system to maintain an average product temperature
Roller Panel Cover
Upper Front Metal Panel on Sliding Door
Set-Point
Lowest temperature setting at which the refrigeration system shuts-off is displayed by pressing the SET button on Digital Controller
Stabilized
Temperatures
Temperature of product and/or return air after appliance has either stablized product to desired temperature, or cabinet return
Trained Professional
Trained Refrigeration and/or Electrical Contractor
