Habasit BTM-1, Руководство по эксплуатации, Страница: 6 / 20

Operating instructions – Belt tension meter BTM-1
Version 1.0
6
Care Instructions
The Belt Tension Meter has been developed for industrial use and is
protected against sprayed water and dust in accordance with IP10; the
measurement probe is protected in accordance with IP66. For cleaning the
housing, a soft cloth, with mild soapy water if necessary, should be used; the
detector surface should only be cleaned with alcohol.
When cleaning the detector surface of the measurement probe, do not use
paper towels or materials that could scratch the detector surface. For optimal
operational conditions, the detector surface as well as the connections
should be protected from becoming soiled or, for example, from coming into
contact with oil or grease.
Maintenance
In case of any malfunction, contact Habasit. Do not open the instrument
yourself. The warranty will expire if unauthorized persons attempt to repair
or otherwise tamper with the instrument.
Storage must always take place under dry conditions. Transport the
instrument only in its original case.
Note
The manufacturer assumes no responsibility for damages that
arise as result of improper maintenance or repair work by third
parties.
Disclaimer
Habasit is not liable for damages that arise as a result of improper use .
Knowledge of this handbook is also part of proper use. For this reason,
strictly follow the instructions in this handbook and in the technical
documents for the sensors. We cannot be liable for errors that arise due to
not following the operating instructions.