Habasit AF-603, Руководство по эксплуатации

Страница: 4 / 20

Operating instructions 3745
Flexproof-Cutter
AF-603
Page 4 of 20
Edition: 01/0512 Subject to alterations
1.3 Scope of supply
Qty. Item
1 AF-603 Flexproof cutter with
1 Die-cutting head 10/80 with 10 mm/ 0.4 in. finger pitch and 80 mm/ 3.15 in. finger length
1 Die-cutting head 20/80 with 20 mm/ 0.8 in. finger pitch and 80 mm/ 3.15 in . finger length
8 Spare cutting blades for cutting head 10/80 and 20/80
3 Spare cutting pads
1 Operating instructions
1.3.1 Available accessories
Die-cutting head 8/30 with 8 mm/ 0.32 in. finger pitch and 30 mm/ 1.18 in. finger length
Die-cutting head 10/120 with 10 mm/ 0.4 in. finger pitch and 120 mm/ 4.72 in . finger length
Spare cutting blades for cutting head 8/30
Spare cutting blades for cutting head 10/120
1.4 Ordering of accessories/spare parts
Spare parts and accessories can be ordered directly from the manufacturer.
Address: Habasit Italiana S.p.A.
Via A. Meucci 8, Zona Industriale
I-31029 Vittorio Veneto/TV
Tel. ++39 438 91 13
Fax ++39 438 91 2374
Please accurately describe the parts required.
State the numbers according to Section 8, Drawings.
WARNING The use of parts by other manufacturers not meeting Habasit specifications is not
admissible.
Habasit declines all responsibility for the consequences if non-Habasit parts are
used.
1.5 Warranty
All tools undergo a strict final inspection. On the assumption of correct handling, they are warranted against
material and manufacturing defects for 2 years.
1.6 Technical advice
Our specialists will be pleased to advise you. For technical questions concerning function and condition of
the Flexproof-Cutter, please contact the manufacturer (Section 1.4).