Rotary - TR/TRT/T5C - Installation
STEP 1
Push
ZERO RETURN
. Push
ALL
.
Move the machine table [1] to the position nearest to the doors.
Push
[EMERGENCY STOP]
.
Connect the rotary air hose to an air supply. The air pressure engages the brake on each rotary axis to prevent internal damage.
Caution:
Make sure the air hose has sufficient length to prevent damage to the rotary when you install it.
STEP 2
Install the eye bolts included with the rotary.
Install the lifting chains [1] and the spreader beam [2].
Refer to the "Rotary - TR/TRT/T5C – Lifting Instructions" at the end of the
procedure for more information.
Caution:
Use a spreader beam, chains, and the air hose connected
to an air supply to prevent damage to the rotary.
Use a spreader beam to make sure the chains stay vertical.
Make sure the TILT Axis is flat to prevent damage to the
rotary. If the TILT Axis is not flat, speak to your Haas
Factory Outlet (HFO).
Copyright 2020 by Haas Automation, Inc. No unauthorized reproduction | Last Published On December 13, 2016
4/12
