ES0205l 12-00
2
LIMITED WARRANTY COVERAGE
All new Haas Mini Mills are warranted exclusively by Haas Automation's limited warranty as
follows:
Each Haas Mini Mill CNC machine and its components (except those listed below under limits and
exclusions) is warranted against defects in material and workmanship for a period of six (6) months
from the date of installation.
Date of purchase is the date that a particular machine is installed at the end user.
An additional six (6) month warranty extension may be purchased from your authorized Haas
distributor.
LIMITS and EXCLUSIONS
Components subject to wear during normal use and over time such as paint, window finish and
condition, light bulbs, seals, etc., are excluded from this warranty.
Factory-specified maintenance procedures must be adhered to and recorded in order to maintain
this warranty.
This warranty is void if the unit is subjected to misuse, neglect, accident, improper installation or
application, or if the unit was improperly repaired by the customer or by an unauthorized service
technician. Warranty service is available from your authorized Haas distributor.
Haas Automation is not responsible for any additional or incidental damage to parts, fixtures,
machines, loss of time, or any other incidental damages that may be caused by a malfunction.
This warranty is transferrable from the original end-user to another party if the machine is sold via
private sale before the end of the warranty period.
NOTE:
Should you have a problem with your machine, please consult your owner's
manual first. If this does not resolve the problem, call your authorized Haas
distributor. As a final solution, call Haas directly at the number indicated below.
Haas Automation, Inc.
2800 Sturgis Road
Oxnard, CA 93030-8933
Phone:(805) 278-1800
FAX: (805) 278-8561
Warranty Certificate
Covering Haas Automation, Inc., CNC Equipment
Effective June 1, 2000
